SHINYBOW AUDIO / VIDEO TUOTTEET

SHINYBOW 5470M  4:2 COMPONENT VIDEO-AUDIO MATRIX SWITCHER

Shinybow 5470M 4:2 component video-audio matrix switcher

A matrix switch with four inputs and two outputs for component video and stereo audio signals. Metal case ear mount version. Including remote control.

- 4 inputs To 2 outputs Matrix router Switcher
- Video Bandwidth 200MHz
- Slew Rate 1500 V/us
- OFF isolation -100 dB@10MHz
- Terminal RCA sockets
- All Hostile Crosstalk -65db @ 5MHz
- Channel switching 15ns
- Audio Frequency Respond 20Hz ~20KHz, + 0.05db.
- Signals Including Component Video (YUV,RGB), 1Vp-p, 75Ohms
- YUV apply to Composite Video(NTSC.PAL,SECAM)
- Audio with Stereo Audio 5Vp-p, 47K Ohms
- Power Voltage Input DC 12V @500mA, ~3A accepted
- Net Weight (Unit Only) About 1566 gwm (with metal case)
- Dimensions (W.D.H.) 17.97" (W) x 5.9¨ (D) x 1.73" (H)
- Englanninkieliset ohjeet
- Takuu 1 vuosi       
 

HETI toimitukseen
omasta varastosta

SB5470M  Shinybow 5470M 4:2 component video-audio
                 matrix switcher

162,00 euro

SHINYBOW 5526  4:2 MATRIX SWITCHER

Shinybow 5526 4:2 matrix switcher

The SB-5526 is a high speed Video matrix routing switcher. It is ideally suited for High Definition Television applications. Control is provided via Front pushbuttons with LED readout or IR remote controller.

- 4 inputs to 2 outputs Matrix Switcher
- Group input / output included
- 1. Component Video: YPBPR/YCBCR/RGB(composite)+HV
- 2. Digital: Coaxial S/PDIF Digital Audio (PCM) or Composite Video
- 3. Optical:Toslink
- 4. Audio: Stereo Audio(AR/HD, AL/VD)
- Support RS 232 interface control driver for 95/98/2000/xp
- Infrared: IR remote control
- Video Bandwidth : 380MHz(13dB) 200mV p-p
- Optical (S/PDIF) in/out: Toslink (PS:OC3=STM1=155.52 Mbps)
- Digital: Coaxial(S/PDIF) Digital Audio (PCM) 10Mbps
- Digital Video Bandwidth : 110MHz
- Audio: Stereo Audio (AR/HD, AL/VD)
- Refresh: for HDTV 408p, 576p, 720p, 1080i60, 1080p60
- Scan rates accepted: 50Hz or 60Hz
- Enclosure type: Support 19 inch Ear/Rack mountable
- RS 232 protocol list with manual attached
- Englanninkieliset ohjeet
- Takuu 1 vuosi       
 

HETI toimitukseen
omasta varastosta

SB5526  Shinybow 5526 4:2 matrix switcher

289,00 euro

SHINYBOW 3730  1:5 HDTV COMPONENT DISTRIBUTION AMPLIFIER

Shinybow 3730 1:5 HDTV component distribution amplifier

The SB-3730 is a distribution amplifier for component video, digital audio and stereo audio signals. It has one input and five outputs. Version with 1000 MHz video bandwidth.

- Supported Signals:
  1- Component Video (YPBPR, YCBCR)
  2- Digital Audio (PCM) - Support Composite Video
  3- Stereo Audio (AR/AL)
- Digital Audio Signals Bandwidth: 110MHz (Support Composite Video)
- Large Signal Bandwidth: 440MHz, G=+2
- Small signal Bandwidth: 1000 Mhz (-3dB), G=+1
- Scan rates accepted: 50Hz or 60Hz
- Drive HDTV displays up to 150 feet away
- High resolution Support HDTV 480p, 720p, 1080i60, 1080P
- Enclosure type: Support 19 inch Ear/Rack mountable
- Englanninkieliset ohjeet
- Takuu 1 vuosi       
 

HETI toimitukseen
omasta varastosta

SB53730  Shinybow 3730 1:5 HDTV component distribution
               amplifier

185,00 euro

SHINYBOW 3737  1:8 HDTV COMPONENT DISTRIBUTION AMPLIFIER

Shinybow 3737 1:8 HDTV component distribution amplifier

The SB-3737 is a distribution amplifier for component video and stereo audio signals. It has one input and eight outputs.

- 1 input to 8 outputs HDTV Component Distribution Amplifier
- Support HDTV Signals
- 1- Component Video (YPBPR, YCBCR)
- 2- Stereo Audio (AR/AL)
- Video Bandwidth: 700MHz, G=+1(small signal), 320Mhz(Large signal)
- Scan rates accepted: 50Hz or 60Hz
- High resolution Support HDTV 480p, 720p, 1080i60, 1080P
- Drive HDTV displays up to 150 feet away
- Enclosure type: Support 19 inch Ear/Rack mountable
- Englanninkieliset ohjeet
- Takuu 1 vuosi       
 

HETI toimitukseen
omasta varastosta

SB53737  Shinybow 3737 1:8 HDTV component distribution
                amplifier

299,00 euro

SHINYBOW 5440RL  4:1 STEREO AUDIO SWITCHER

Shinybow 5440RL 4:1 stereo audio switcher

The SB-5440RL has four inputs and one output for stereo audio signals (RCA connectors). A remote controller is included.

- 4 inputs to 1 output stereo audio switcher
- Audio signal: stereo audio, RCA connectors
- Audio frequency respond: 20Hz ~ 20 KHz, 0.05dB
- Drive TV signal up to 500~1000 feets away
- Scan rates accepted: 50Hz to 60Hz
- Control by front pushbuttons with LCD readout
- Infrared: IR remote controller (38 KHz)
- Enclosure type: wall mountable ear panels attached
- Englanninkieliset ohjeet
- Takuu 1 vuosi       
 

HETI toimitukseen
omasta varastosta

SB5440RL  Shinybow 5440RL 4:1 stereo audio switcher

98,00 euro

SHINYBOW 5544  4:4 AV MATRIX SWITCHER

Shinybow 5544 4:4 AV matrix switcher

The SB-5544 is a matrix switcher which has four inputs and four outputs for composite video and stereo audio. This switcher supports resolutions up to 1080P, which makes it ideally suited for use with high definition LCD and plasma screens.

- 4 inputs to 4 outputs AV matrix Switcher
- Support - 1. Composite Video,  2. Stereo Audio (AR/AL)
- Video bandwidth: 200MHz
- High resolution support HDTV 480p, 720p, 1080/60, 1080p
- Drive HDTV signal up to 300~1000 feets away
- Scan rates accepted: 50 Hz or 60 Hz
- Control by front or IR remote panels
- Enclosure type: support 19 inch EAR and Rack mountable
- Englanninkieliset ohjeet
- Takuu 1 vuosi       
 

HETI toimitukseen
omasta varastosta

SB5544  Shinybow 5544 4:4 AV matrix switcher

179,00 euro

SHINYBOW 5520 4:2 SCART MATRIX SWITCHER

Shinybow 5520 4:2 scart matrix switcher

The SB-5520 is a high speed SCART Matrix routing switcher. SB-5520 is one of the most innovative SCART RGB/S-Video(Y/C)/Composite Video/Stereo Audio
switching products on the market Today.

The SB-5520 support 4 individual inputs with 2 individual outputs. Because it is a matrix router, any input may be routed to any output; or the same input may be routed to all outputs or any combination. It completely eliminates the need to constantly move around SCART input and output cables. The SB-5520 matrix switcher is ideally suited for High Definition Television applications.

Control is provided via Front pushbuttons with LED readout or IR remote controller.

- Auto Scan and Adjustment Screen 16:9 or 4:3
- Video Bandwidth : 110MHz , -3dB (G=+2)
- Supports SCART1 and SCART2 system
- SCART Group input / output included
- 1. RGB
- 2. S-Video (Y/C)
- 3. Composite Video
- 4. Audio: Stereo Audio(AR, AL)
- Scan rates accepted: 50Hz or 60Hz
- Refresh: for HDTV 408p, 576p, 720p, 1080i59, 1080i60
- Infrared: IR remote controller(38KHz)
- Englanninkieliset ohjeet
- Takuu 1 vuosi       
 

HETI toimitukseen
omasta varastosta

SB5520 Shinybow 5520 4:2 scart matrix switcher

145,00 euro

SHINYBOW 5525 6:2 SCART MATRIX SWITCHER

Shinybow 5525 6:2 scart matrix switcher

The SB-5525 is a high speed SCART matrix routing switcher. SB-5525 is one of the most innovative SCART RGB/S-Video(Y/C)/Composite Video/Stereo Audio
switching products on the market today. The SB-5525 support 6 individual inputs with 2 individual outputs. Because it is a matrix router, any input may be routed to any output; or the same input may be routed to all outputs or any combination.

It completely eliminates the need to constantly move around SCART input and output cables. The SB-5525 matrix switcher is ideally suited for High Definition Television applications. Control is provided via Front pushbuttons with LED readout or IR remote controller.

- 6 inputs to 2 outputs SCART Matrix Switcher
- Infrared: IR remote control
- Video Bandwidth: 110MHz, -3dB (G=+2)
- Double Buffered Input Logic
- SCART Group input / output included
- Auto Scan 16:9 or 4:3 monitor screen
- 1. RGB
- 2. S-Video (Y/C)
- 3. Composite Video
- 4. Audio: Stereo Audio(AR, AL)
- Supported resolutions: for HDTV 408p, 576p, 720p, 1080i59, 1080i60
- Scan rates accepted: 50Hz or 60Hz
- Good Video Specifications
- Front pushbuttons with LED readout
- Englanninkieliset ohjeet
- Takuu 1 vuosi       
 

HETI toimitukseen
omasta varastosta

SB5525 Shinybow 5525 6:2 scart matrix switcher

174,00 euro

SHINYBOW 6130 COMPONENT CAT-5 ETHERNET TRANSMITTER

Shinybow 6130 component CAT-5 ethernet transmitter

A compact transmitter for sending component video signals (YPbPr, RGB) up to 300m to a CAT 5 receiver, suitable for use with the SB-6130R receiver

- Inputs via gold plated, colour coded RCA phono sockets
- Easy to install and highly reliable
- RJ-45 output socket
- Brushed aluminium case with mounting brackets
- LED power ON indicator
- Supplied with mains adaptor
- Supports HDTV resolution 480p, 720p, 1080i
- For use in conjunction with the CAT 5 receiver (128.658)
- Auto tint and brightness control
- Power supply: 12Vdc, 300mA
- Distortion: -80dB total harmonic @ 1 MHz: Rl = 100 ohms
- Video input level: 1.45V (p-p) max.
- Video bandwidth: 450MHz, -3dB
-Slew rate: 1600V/µs
- Dimensions: 66 x 70 x 26mm
- Weight: 510g
- Englanninkieliset ohjeet
- Takuu 1 vuosi       
 

HETI toimitukseen
omasta varastosta

SB6130 Shinybow 6130 component CAT-5 ethernet transmitter

103,00 euro

SHINYBOW 6130R COMPONENT CAT-5 ETHERNET RECEIVER

Shinybow 6130R component CAT-5 ethernet receiver

A compact receiver for accepting component video signals (YPbPr, RGB) from a CAT 5 transmitter up to 300m)away. Suitable for use with the SB-6130 transmitter.

- Outputs via gold plated, colour coded RCA phono sockets
- Easy to install and highly reliable
- RJ-45 input socket
- Brushed aluminium case with mounting brackets
- LED power ON indicator
- Supplied with mains adaptor
- Supports HDTV resolution 480p, 720p, 1080i
- For use in conjunction with the CAT 5 transmitter (128.655)
- Adjustable tint and brightness
- Power supply: 12Vdc, 300mA
- Distortion: -80dB total harmonic @ 1 MHz: Rl = 100 ohms
- Video output level: 1.45V (p-p) max.
- Video bandwidth: 450MHz, -3dB
- Slew rate: 1600V/µs
- Dimensions: 66 x 70 x 26mm
- Weight: 505g 
- Englanninkieliset ohjeet
- Takuu 1 vuosi       
 

HETI toimitukseen
omasta varastosta

SB6130R Shinybow 6130R component CAT-5 ethernet receiver

114,00 euro

SHINYBOW 6135 DIGITAL-VIDEO-AUDIO CAT-5 ETHERNET TRANSMITTER

Shinybow 6135 digital-video-audio CAT-5 ethernet transmitter

The SB-6135 is a high quality transmitter for digital and stereo audio. It converts digital or analog stereo audio signals to a signal suitable for a ethernet network by CAT5 cable. Suitable for use with the SB-6135R.


- Support Digital(PCM) / Stereo Audio CAT5 Transmitter
- Triple high speed differential driver
- 225 Mhz, -3dB large signal bandwidth
- 450 Mhz, -3dB small signal bandwidth
- Build in 2 in1 Digital Audio(PCM) and Stereo Audio(AR/AL) Transmitter
- Category UTP cable maximum length to 1000 ft
- Enclosure type: wall mountable
- Englanninkieliset ohjeet
- Takuu 1 vuosi       
 

HETI toimitukseen
omasta varastosta

SB6135 Shinybow 6135 digital-video-audio CAT-5 ethernet
             transmitter

103,00 euro

SHINYBOW 6135R DIGITAL-VIDEO-AUDIO CAT-5 ETHERNET RECEIVER

Shinybow 6135R digital-video-audio CAT-5 ethernet receiver

The SB-6135R is a high quality receiver for digital and analogue stereo audio. It converts signals received through the ethernet by a CAT5 cable to digital or analogue stereo audio signals. Suitable for use with the SB-6135.


- Digital Audio (PCM) and Stereo Audio CAT5 Receiver
- High speed 160 Mhz, large signal bandwidth
- Build in 2 in1 Digital Audio and Stereo Audio CAT5 Receiver
- Low output noise: 1.5mV rms integrated noise(1GHz)@100 meters
- Category UTP cable maximum length to 1000 ft
- Enclosure type: wall mount metal case
- Englanninkieliset ohjeet
- Takuu 1 vuosi       
 

HETI toimitukseen
omasta varastosta

SB6135R Shinybow 6135R digital-video-audio CAT-5 ethernet
               receiver

114,00 euro

SHINYBOW 5601 2/1 HDMI SWITCHER

Shinybow 5601 2/1 HDMI switcher

The SB-5601 is a compact HDMI switch with two inputs and one output.

- 2 inputs to 1 outputs HDMI/DVI Links
- Bidirectional unbuffered inputs/outputs
- Four TMDS channels per link
- Fully buffered unidirectional inputs/outputs
- Supports 250 Mbps to 1.65Gbps data rates
- Enabling 1080p HDMI formats
- Supports 25 Mhz to 165MHz pixel clocks
- Four auxiliary channel per link
- Automatically scan select inputs signal
- Control is provided via Front push buttons with LED readout
- Englanninkieliset ohjeet
- Takuu 1 vuosi       
 

HETI toimitukseen
omasta varastosta

SB5601  Shinybow 5601 2/1 HDMI switcher

119,00 euro

SHINYBOW 5608 8/1 HDMI SWITCHER

Shinybow 5608 8/1 HDMI switcher

The SB-5608 is a high quality switcher with eight HDMI inputs and one HDMI output. The requested channel can be selected by the buttons on the front, by the included remote control or by the PC through the RS 232 interface.

- Switches 8 HDMI Devices to 1 HDMI input Port
- Four TMDS channels per link
- Supports 250 Mbps to 1.65Gbps data rates
- Enabling HDMI formats (1080P, 1080I, 720P, 480P)
- Supports 25 Mhz to 165MHz pixel clocks
- PC resolutions to 1920x1200 and UXGA(1600x1200) DVI resolutions
- Bidirectional unbuffered inputs/outputs
- RS232 PC Control: a windows based control software
- Englanninkieliset ohjeet
- Takuu 1 vuosi       
 

HETI toimitukseen
omasta varastosta

SB5608  Shinybow 5608 8/1 HDMI switcher

429,00 euro

SHINYBOW 5652 1:2 HDMI DISTRIBUTION AMPLIFIER

Shinybow 5652 1:2 HDMI distribution amplifier

The SB-5652 is a HDMI distribution amplifier featuring one input and two outputs. This distributor supports resolutions up to 1080p, which makes it ideally suitable for High Definition LCD Television or Plasma display applications.

- Distributes 1x HDMI Device to 2 HDMI output Ports
- PC resolutions to 1920x1200 and UXGA(1600x1200) DVI resolutions
- Infrared: IR remote control power on/off
- Supports 25 Mhz to 165MHz pixel clocks
- Bidirectional unbuffered input/outputs
- Support Four TMDS channels per link.
- Enabling HDMI formats (1080P, 1080I, 720P, 480P)
- Supports 250 Mbps to 1.65Gbps data rates
- Englanninkieliset ohjeet
- Takuu 1 vuosi       
 

HETI toimitukseen
omasta varastosta

SB5652  Shinybow 5652 1:2 HDMI distribution amplifier

183,00 euro

SHINYBOW 1102  1:2 VGA DISTRIBUTOR

Shinybow 1102  1:2 VGA distributor

The SB-1102 is a distribution amplifier for VGA signals. It provides 1 VGA input and 2 VGA outputs. Resolutions up to WUXGA (1920x1200) are supported.

- 1 input to 2 outputs VGA Distribution Amplifier
- Large Signal Bandwidth 440MHz, G=+2
- Small signal Bandwidth(-3dB) 1GHz, G=+1
- Goods Video Specifications Gain Flatness 0.1 dB to 75 Mhz
- High resolution for VGA, SVGA, XGA, UXGA,WUXGA 1920x1200
- Scan rates accepted: 50Hz or 60Hz
- Enclosure type: Support wall mountable
- Englanninkieliset ohjeet
- Takuu 1 vuosi       
 

Tilauksesta noin 3-5 viikkoa

SB1102  Shinybow 1102  1:2 VGA distributor

118,00 euro